 |
 |
 |
 |
 |
| Profile |
|
Quality
Control and Assurance
|
¡ñQuality
Control System
¡ñISO
9001 Quality Control & Assurance
¡ñReliability
Condition
¡ñQuality
Assurance Flow Chart
Quality figures promineutly as a fundamental value in all aspects of our manufacturing. Our strength is consistently maintainad through our effective manufacturing and prowrement quality system.
* ISO 9001 certificate.
* Total Quality Management.
* Zero defect program.
* Selected vendor partnership.
* Periodicaly Relibility test.
ISO
9001 Quality Control & Assurance
| Quality Control & Assurance Dept. |
| Incoming
& Quality Control 1. AQL standard Sampling inspection. 2. Incoming Engineering, Mechancial, Electronical, Optical test. 3. Vendor quality Audit. |
| In
process & Assurance System 1. On line QC (clean, printing , chip position) 2. After wire boundIng 100% test & Inspection. (electronical, optical) 3. Final test & Inspection (100% QC, mechancial, electronical, optical.) 4. Functional test of LSI, LCD, contrast, etc. |
| Out
Going & Quality Control 1. Functional test (electronical, AC, DC, pin terminal, mechanical) 2. LCM QC test (contrast , characters, display, etc.) 3. Sampling QC according to AQL Standard (value=0.65) |
| LCD Module(Consumer Type) | |||
| Item | Test Conditio | Applicable Standard | |
| High Temperature Storage | Storage
At 60¡À2¡æ 96~100hrs Surrounding Temperature, Then Store In Normal Condition=4hrs |
MIL-202E | |
| Low Temperature Storage | Storage
At -20¡À2¡æ℃ 96~100hrs Surrounding Temperature, Then Store In Normal Condition=4hrs |
MIL-202E | |
| High Temperature/Humidity Storage |
Storage
96~100hrs at 60¡À2¡æ,
90%RH Or Storage
96~100hrs at 40¡À2¡æ℃,90%RH |
MIL-202E | |
| Temperature Cycling | -20¡æ(60Mins)¡ú25¡æ(5Mins)¡ú70¡æ(60Mins)¡ú25¡æ(60Mins) 10Cycles
|
MIL-202E | |
| Vibration | 10~55Hz(1
Minute)1.5mm X,Y And Z Direction * (Each 2hrs) (Each 3 Times) |
MIL-202E | |
| Drop Test | Packing Weight(Kg) | Drop Height(Cm) | MIL-810E |
| 0~45.4 | 122 | ||
| 45.4~90.8 | 76 | ||
| 90.8~454 | 61 | ||
| Over 454 | 46 | ||
|
Module Produce Flow Chart |
Sales Service Flow Chart |
|||||||
 |
 |
|||||||
|
Q.A Activity 1.TQM Activities2.TPM Activities 3.Process improvement proposal 4.ISO 9001 Maintenance Activities 5.Education And Training Activities 6.Standarization Management 7.Equipment calibration |
||||||||
